Home > News > Industry News

Precautions for the use of slings

2022-05-17

1. Overloading is strictly prohibited.
2. The operation of two slings is to hang the two slings directly into the double hooks, and the slings are hung at the symmetrical force center position of the double hooks; when four slings are used, every two slings are directly hung into the double hooks. Note that the inner slings cannot overlap and squeeze each other, and the slings should be symmetrical to the stress center of the hook.
3. When the sling is used, it is not allowed to tie the winding method.
4. When the sling is used, hang the sling directly into the force center of the hook, not on the hook tip of the hook.
5. In the hoisting function, the hoisting belt is not allowed to cross, twist, and twist, and it should be connected with the correct special hoisting connector.
6. When encountering goods with sharp corners and edges, the sling must be protected by methods such as walnuts and corner guards to prolong the service life of the sling. It is strictly forbidden to use the sling on rough surfaces to avoid the sling being cut by edges and corners and scratched by rough surface friction.
7. The opening angle of the ring eye of the circular sling should not be greater than 20°, and the ring eye should not be cracked during the hoisting process.
8.. When hoisting pipe objects, the correct hoisting method should be adopted. If the hoisting angle is too large, it will cause potential safety hazards.
9. The items should not be pressed on the sling, which will cause the sling to be damaged by force and wear. You should not try to pull the sling out from below, which will cause danger. Use the object to cushion it, leaving enough space for the sling to come out smoothly.

10. The slings should not be dragged on the ground or rough surface objects.

10T Round Webbing Sling Belt

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept